MRMC MRMC-2261-00, Быстрый старт

Страница: 11 / 24

USB Large Format Panel Quick Start Guide
7
Recording a preset
1. If you have multiple heads connected, select the head for which you
want to record the preset using the buttons in the Head Select
section on the USB LFP.
2. Press the
STORE
button.
3. If you haven’t done so already, use the axes controls on the USB LFP
to go to the head direction and position, and lens focus and zoom
setting that you want to record.
4. Press one of the 12 preset buttons.
5. Repeat steps 2 and 3 to record additional preset moves, using a
different preset button for each position.
Pressing one of the numbered preset buttons will store the current
settings to that button, overwriting the previous settings for that
button.
Go To Preset
To go to a preset position, press one of the Preset buttons.
Stop
Pressing this button would stop the selected robot.
Stop button
The top left button is a
STOP
button pressing which would stop the USB
LFP controls from functioning. This can be used in situations where you
want to avoid accidentally pressing any controls that result in the robot
changing its position.
Note
If no preset has yet been stored then the default preset position is 0
for all axes.