MRMC MRMC-1998-01, Быстрый старт, Страница: 38 / 52

Polymotion Player Quick Start Guide
32
Fix All button
The Fix All button sends commands to fix trips on all axes of all robots.
The robot mode does not affect this functionality.
Stop All Button
Stops tracking for all robots in Tracking Mode.
Stop button
The Stop button stops all movement on all robots as well as stops tracking
on robots that were tracking a target.
Presets
The buttons on the side of the screen match the first 8 presets from the
Main page. On the Spotter Screen, they behave as group presets, i.e. when
pressed all robots that have this preset position stored go to it (Robot
mode does not matter). If at least 1 robot has a corresponding preset
stored, the buttons appear light grey – stored state (Presets A-E on the
example).
If none of the robots have a corresponding preset stored, they
will appear transparent with grey border – empty state (F-H on
the example).
If all robots are in the position of the same preset, the preset
button changes.
If at least one robot left the position of the preset, the button
will go back to its stored state.
Note
The Play All button affects the robots in Tracking mode only.When
there are no robots in tracking mode, the button is disabled.