MRMC MRMC-1465-06, Быстрый старт

Страница: 5 / 28

Pan Bars Quick Start Guide
1
Pan Bars Quick Start Guide Pan Bars Quick Start Guide
Chapter 1 Quick Start
Safety
•
Do not use around flammable gas. All electrical equipment can
generate sparks that can ignite flammable gas.
•
Keep the equipment dry. The system has not been made
weatherproof. Do not use with wet hands.
•
Keep cables tidy. Use cable ties to keep them out of harm’s way. If
you have a head with slip rings then make use of them; avoid
running any cables between the base and the rotating head or
camera.
Overview
Thank you for using the Pan Bars from Mark Roberts Motion Control
(MRMC). Pan Bars is a Ethernet mimic controller for the MRMC camera
head. It gives you a smooth, precise and real-time control over your
choice of camera axes —pan and tilt, and camera control — zoom or
focus or both. Pan Bars are designed to work well with both Flair motion
control and MHC software systems by MRMC.
Pan Bars can have the following configuration:

Basic Pan and Tilt over Ethernet to either a Flair or MHC
computer with Zoom or Focus or both - page 2

As a mimic controller in which the encoder output is sent to
RT-14 connected to the head - page 4

As a mimic encoder output to a Datalink system using a mimic
box (Flair): The Mimic Box is used to convert the raw encoder
data and provide Ethernet (redundant function as already on
basic Pan Bars) or Datalink which is needed for legacy systems
- page 5

Pan Bars with an Ethernet or Datalink MSA joystick controller:
The Pan Bars provide mimic encoder inputs via Ethernet to the
MSA Joystick which then controls the Head via Ethernet or
Datalink.