MRMC MILO MRMC-1100-00, Быстрый старт

Страница: 19 / 44

Milo Quick Start Guide
15
Mounting the Power Supply Unit and the driver
box bracket
The Gorilla Power Supply must be internally set to the voltage of single
phase supply that will be used in that studio or country. There are taps
inside the PSU that allow this changeover. This does not apply to the Milo
if used only with the Titan Arm, as then it must be 240v phase to neutral,
but the PSU must be set internally to this.
1. Add the bracket on the two mounting hooks on the rear of the
turret.
2. Lift the PSUs and place them in the bracket.