MRM LFP, Быстрый старт

Страница: 44 / 92

LFP Quick Start Guide
40
LFP Quick Start Guide LFP Quick Start Guide
Appendix 1
Menu reference
The collection of menu options that are available on your controller
depends on which menu mode you are in: Broadcast, Film, or
Engineering. To change modes, use the menu option
CHANGE MODE
. The
controller remembers the current mode when you switch it off between
sessions. The options are summarised in the following sections:
•
Broadcast mode on page 42
•
Film mode on page 44
This Appendix describes the menu options in version MSA-21 6.14 of the
LFP firmware. The firmware version number is displayed on the screen
when you first power up the controller in Normal mode or Flair mode.
The names of the controls , as they appear in the menu, can vary
depending on which specific controller model you’ve got and how it has
been configured for accessories. For example, the LFP is typically set up
for the following controls:
JOY HORIZ
(Joystick Horizontal)
JOY VERT
(Joystick Vertical)
JOY ROTATE
(Joystick Rotate)
FOCUS CON
(Focus Control)
ZOOM CON
(Zoom Control)
FOCUS AUX
(Focus Auxiliary control)
ZOOM AUX
(Zoom Auxiliary control)
PB 1
(Pan Bars 1)
Caution
When you go into Engineering mode you are prompted for a
four-digit password (available from Mark Roberts support), as
applying the wrong settings here can stop the system from working.
You should only use Engineering mode if you are an experienced
user and have requirements that cannot be satisfied by using options
in the other two modes. Make a note of any changes that you make
so you can revert to the previous value if the system stops working.
Engineering mode is beyond the scope of this
Quick Start Guide . If
you need this information please refer to the more comprehensive
User Guide for your controller.