MRC HCEN-24 Скачать руководство пользователя страница 21

13. Ordering information

Order code 

Model 

Description 

9063001126 

HCEN-24

Economical  capillary  centrifuge  (including  AC24  capillary  rotor 

package), national standard-compliant plug, 220V, 50Hz 

Accessories 

19400047 

AC24 

Capillary rotor package, including rotor, rotor cover and reading dial, 

with maximum rotation speed of 12,000 rpm, maximum capacity of 

24 capillaries, suitable for 

HCEN-24

.

14

  Warranty 

14.1 

Unit warranty 

The  entire  use  will  have  two-year  warranty  period  commencing  from  delivery  date  under  the 

conditions of normal maintenance. 

 

14.2 

Rotor warranty 

The  rotor  will have  5-year  warranty  period  from  the date  of delivery.  Don’t  use  any rotor  damaged 

due to corrosion or fatigue. The damage to the entire unit or rotor due to any of the following reasons 

is outside the scope of warranty.   

(1) Damage due to improper installation.

(2) Damage due to brutal or improper operation.

(3) Damage to relocation or transport after completion of installation.

(4) Damage due to dismantling or modification by any unauthorized entity or individual.

(5) Damage due to use any parts not supplied by our company, such as rotor and adaptor.

(6) Damage due to natural disasters, including fire and earthquake.

(7) Wearing parts and parts with warranty period.

After-sales services 

To  ensure  safe  and  efficient  operation  of  a  centrifuge,  periodical  maintenance  is  required.  If  the 

centrifuge fails, don’t attempt to repair it. Please contact the service center.     

Содержание HCEN-24






















Отзывы: