MRC DRS4000, Руководство пользователя и техническое руководство

Страница: 33 / 88

Routine Operation 2-17 DRS4000 Receiver User and Technical Manual
Figure 2-18: Review or Change PIDs
Control menu is
displayed Select Setup and
press OK
Setup Menu is
displayed
Select Audio/Video
Configuration and
press OK
Configure Audio/
Video X
menu is
displayed
Select Set/View PIDS
and press OK
If Use SI Service
Information option is
set to On:
If Use SI Service
Information option is
set to Off:
OR
View PIDs (Read-
Only)
menu is
displayed
Review PID data, as
required, and press
OK
Select Back until
Control menu is
displayed
Manual PIDs Edit
menu is displayed
Select PCR PID and
press OK
Enter PID values, as
required, and press
OK
Select Video PID and
press OK
Enter PID values, as
required, and press
OK
Select Audio 1 PID
and press OK
Enter PID values, as
required, and press
OK
Select Audio 2 PID
and press OK
Enter PID values, as
required, and press
OK
Select Data PID and
press OK
Enter PID values, as
required, and press
OK
Select Done and
press OK
Select Back until
Control menu is
displayed
NOTE
It may be necessary
to select
More... or
Back... to locate the
Set/View PIDS option.