MR TAPCON Скачать руководство пользователя страница 245

Страница: 245 / 334

8 Operation

Maschinenfabrik Reinhausen GmbH 2020

245

3587317/21 EN

TAPCON

Deleting user

To delete an existing user, proceed as follows:

1. Go to

Settings > Administration > User

2. In the list, select the

button for the desired user.

3. Press the

Accept

button to delete the user.

8.26.4 Setting access rights to parameters and events

You can configure access rights to parameters and events for the available
roles. The following options are available for this purpose:

▪ Read: Parameter/event may be displayed.

▪ Write: Parameter/event may be modified.

▪ Acknowledge: Event may be acknowledged.

Figure 173: Setting access rights for an event

You can only change access rights if you are assigned an administrator
role.

When in delivery status, you can log in as the administrator as follows:

▪ User name:

admin

▪ Password:

admin

To set the access rights to parameters and events, proceed as follows:

1. Go to

Settings > Administration > Parameters/events

A list of all parameters or events appears.

2. Select the desired entry in the list.

3. Select the options you want.

4. Press the

Accept

button to save the change.

Содержание TAPCON















































































































































































































































































































































Результаты поиска

Содержание TAPCON

Отзывы:

Бренды по названию

Популярные бренды

MR TAPCON, Руководство по эксплуатации

Результаты поиска

Содержание TAPCON

Отзывы:

Бренды по названию

Популярные бренды