MR MESSKO MPREC страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 60

background image

2 Safety

10

BA5789879-01 EN

This technical document contains detailed descriptions on the safe and
proper installation, connection, commissioning and monitoring of the prod-
uct.

▪ Read this technical document through carefully to familiarize yourself with

the product.

▪ This technical document is a part of the product.

▪ Read and observe the safety instructions provided in this chapter in partic-

ular.

▪ Observe the warnings in this technical document in order to avoid func-

tion-related dangers.

▪ The product is manufactured on the basis of state-of-the-art technology.

Nevertheless, risks to life and limb of the user or impairment of the prod-
uct and other material assets may occur during use due to function-re-
lated dangers.

2.1 Intended use

The pressure relief device protects transformers and on-load tap-changers
against impermissible pressure increases. At a predefined pressure, the
pressure relief device opens, relieves the pressure and closes tightly again
once the pressure has been relieved.

The product is designed solely for use in electrical energy systems and facili-
ties. If used as intended and in compliance with the requirements and condi-
tions specified in this technical document and the warning notices in this
technical document and attached to the product, the product does not
present any danger to persons, property or the environment. This applies
throughout the entire service life of the product, from delivery, installation
and operation to removal and disposal.

Intended use refers to the following:

▪ Only use the product with the transformer type specified in the order and

the associated operating data.

▪ You will find the standard valid for the product and the year of issue on the

nameplate.

▪ Operate the product in accordance with this technical document, the

agreed-upon delivery conditions and the technical data.

▪ Ensure that any necessary work is only performed by qualified personnel.

«
...
8
9
10
11
12
...
»

Содержание MESSKO MPREC





























































Отзывы:

Нет отзывов

Похожие инструкции для MESSKO MPREC

Бренд: Unex Страницы: 5

SafetuNet Alert

Бренд: Masimo Страницы: 2

Бренд: Keithley Страницы: 42

Бренд: Xo Страницы: 59

Бренд: Falcon Страницы: 8

Бренд: Taylor-Wharton Страницы: 25

Бренд: i-CAT Страницы: 96

Бренд: Rain Harvesting Страницы: 2

Бренд: Pani Страницы: 12

Бренд: unicraft Страницы: 16

Бренд: ABB Страницы: 13

Бренд: FASTER TOOLS Страницы: 19

Бренд: +GF+ Страницы: 2

Unity for Pro-Flex Pivot

Бренд: Össur Страницы: 40

ICELOCK 234 LANYARD

Бренд: Össur Страницы: 94

Бренд: Össur Страницы: 115

Бренд: Össur Страницы: 253

Бренд: Össur Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды