MR ETOS TD, Руководство по эксплуатации

Страница: 292 / 356

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 292 4453918/14 EN ETOS
®
TD
Deactivate the unused redundancy protocols by selecting the Off option in
the Function group field.
Resetting to factory settings
To reset the Ethernet switch to its factory default settings, proceed as fol-
lows:
1. Go to Basic settings > Load/Save and click on the Reset to factory de-
faults… button.
2. Reestablish the connection to the IP address of 192.168.1.1 if necessary.
3. Set the MR factory settings in accordance with the following table.
Menu Parameter MR factory setting
Redundancy Redundancy protocol PRP
Security > Pre-login
banner Login banner MR-specific
Basic setting > Port
configuration Ports 5+6 Deactivated
Table 95: MR factory setting
9.38 TAPCON® Personal Logic Editor (TPLE)
You can use the TAPCON® Personal Logic Editor (TPLE) function to pro-
gram simple logical links via the web-based visualization. You can also link
the inputs and outputs available on the device using function modules.
Note that the device does not meet the requirements of a protective device.
Therefore, do not use TPLE to produce protective functions.
9.38.1 Function
9.38.1.1 Function groups
There are 10 function groups available that you can use to combine various
sub-tasks into one function. In one function group, you can link up to 12
function modules with variables. You can rename function groups and acti-
vate or deactivate them individually.