MR ETOS TD Скачать руководство пользователя страница 282

Страница: 282 / 356

9 Visualization

Maschinenfabrik Reinhausen GmbH 2020

282

4453918/14 EN

ETOS

4. Select the

role

you want.

5. If necessary, activate the

Group account

Active

Auto login

options.

6. Press the

Accept

button to save the user.

Editing users

To edit an existing user, proceed as follows:

1. Go to

Settings > Administration > User

2. In the list, select the

button for the desired user.

3. Make the amendments desired.

4. Press the

Accept

button to save the user.

Deleting user

To delete an existing user, proceed as follows:

1. Go to

Settings > Administration > User

2. In the list, select the

button for the desired user.

3. Press the

Accept

button to delete the user.

9.34.4 Setting access rights to parameters and events

You can configure access rights to parameters and events for the available
roles. The following options are available for this purpose:

▪ Read: Parameter/event may be displayed.

▪ Write: Parameter/event may be modified.

▪ Acknowledge: Event may be acknowledged.

Figure 213: Setting access rights for an event

Содержание ETOS TD





































































































































































































































































































































































Результаты поиска

Содержание ETOS TD

Отзывы:

Похожие инструкции для ETOS TD

Бренды по названию

Популярные бренды

MR ETOS TD, Руководство по эксплуатации

Результаты поиска

Содержание ETOS TD

Отзывы:

Похожие инструкции для ETOS TD

Бренды по названию

Популярные бренды