![MR ETOS IM Скачать руководство пользователя страница 224](http://html.mh-extra.com/html/mr/etos-im/etos-im_operating-instructions-manual_1844393224.webp)
7 Operation
Maschinenfabrik Reinhausen GmbH 2019
224
5163667/06 EN
ETOS
®
IM
If device functions are configured for Modbus, you can link the functions to
the data points of the sensors.
Figure 168: Assigning functions
The operation described below is only possible if you access the visualiza-
tion using a computer. You must also have a Parameterizer or Administrator
user role.
Proceed as follows to assign the functions:
ü
The functions of the digital signals [
Section 7.18, Page 232] and analog
Section 7.17, Page 230] are configured for Modbus.
1. Go to
Settings > Sensor bus > Function assignment
.
2. Select the desired sensor
address
.
3. Select the desired
data point
.
4. Press the
Accept
button to save the changes.
5. After assigning the functions, reset the device to apply the changes.
7.16.4 Defining the sensors
This menu lets you define your own sensors, which you can connect to the
device over the MR sensor bus. The defined sensors are then available in
the sensor management function as a selection option.
The sensor editor shows you an overview of the defined sensors:
▪ Name
▪ Version
▪ Manufacturer
Содержание ETOS IM
Страница 1: ...Monitoring system ETOS IM Operating instructions 5163667 06 EN ...
Страница 410: ......
Страница 411: ......