MQ Mqs36h55 Скачать руководство пользователя

Страница: 27 / 64

MQS36H SeRIeS WaLK-BeHIND TROWeL • OpeRaTION aND paRTS MaNUaL — Rev. #0 (03/08/12) — page 27

OptiOns

Blades are a vital part of finishing concrete. This trowel,

or finisher, has been designed to finish concrete and the

blades are built to stringent quality standards out of the

finest steel.
If you need replacement blades, consult the parts list in

this manual for part numbers and order them from your

Multiquip parts dealer or importer.

Combo Blades

This trowel is equipped with combination float/finish (Figure

35) blades as original equipment. These blades have been

designed for optimum performance in both the floating and

finishing operations. These blades are versatile and should

take care of most troweling needs.

Figure 35. Combination Blade

Finish Blades (Optional)

These blades (Figure 36) have been specifically designed

for finish operations with this trowel. They will provide a

premium surface finishing capability from your trowel. They

should only be used after the concrete has set to the point

where the trowel does not sink into the concrete when

placed on it.

Figure 36. Finish Blade

NOTICE

Trowel blades should be changed when they fail to finish

concrete in a satisfactory manner.

Clip-On Float Blades (Optional)

These blades will clip (Figure 37) onto an existing installed

blade, allowing your finisher to float on “wet” concrete so

that the troweling operation can begin as early as possible.

These blades are easily removable, so that after the floating

operation, when the concrete is sufficiently cured, they can

be removed to expose the finish blades for continued

troweling.

Figure 37. Clip-On Float Blade

Float Discs (Optional)

These round discs (Figure 38) attach to the spiders and

allow the machine to “float” on “wet” concrete. The disc

design allows early floating and easy movement from wet

to dry areas. They are also very effective in embedding

large aggregates and surface hardeners.

Figure 38. Float Disk/Pan

NOTICE

For optimum panning performance blade speed must

be changed. Use Low Speed Kit. Reference Engine

Assembly in parts section of this manual.

Содержание Mqs36h55

































































Результаты поиска

Содержание Mqs36h55

Отзывы:

Похожие инструкции для Mqs36h55

Бренды по названию

Популярные бренды

MQ Mqs36h55, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание Mqs36h55

Отзывы:

Похожие инструкции для Mqs36h55

Бренды по названию

Популярные бренды