©
©
©
© 2017 mPTech. All rights reserved.
2017 mPTech. All rights reserved.
2017 mPTech. All rights reserved.
2017 mPTech. All rights reserved.
SmartView 7 3G
SmartView 7 3G
SmartView 7 3G
SmartView 7 3G EN
EN
EN
EN
20
9
99
9
Resetting the device to factory settings
10
10
10
10
Microphone
11
11
11
11
Multifunctional microUSB port
12
12
12
12
Headphone port minijack 3.5 mm
13
13
13
13
Slot for opening the SIM and microSD card cover flap
14
14
14
14
External speaker
7. Before the first start
7. Before the first start
7. Before the first start
7. Before the first start
7.1 Mounting the SIM card.
7.1 Mounting the SIM card.
7.1 Mounting the SIM card.
7.1 Mounting the SIM card.
The device is a tablet made in Dual SIM technology (2 SIM cards handling) allowing
the use of two mobile networks simultaneously. To insert the SIM card (s)
correctly, turn off the device, open the device with your fingernail and gently
remove the cover, insert the SIM card(s) into the slot(s) as shown in the
illustrations next to the slots. Then carefully insert and close the cover.
7.2 Installation of the memory card.
7.2 Installation of the memory card.
7.2 Installation of the memory card.
7.2 Installation of the memory card.
To insert the memory card correctly, turn off the device, pry the cover with your
fingernail and remove it gently, insert the microSD card into the slot as shown in
the illustrations next to the slot. Then carefully insert and close the cover.
Use only memory cards recommended by the manufacturer. Pay attention
to the selection of the proper format-the microSD card, capacity and type / class.
Incompatible memory cards may damage the device and cause the stored data
to be destroyed as well. Incompatibility of memory card can be caused, among
others, by an incorrect card format (required format microSD) or an unsupported
card capacity - above the value recommended by the manufacturer.
7.3 Charging the battery
7.3 Charging the battery
7.3 Charging the battery
7.3 Charging the battery
Charge the battery before the first use. The battery should be charged by the
attached charger or another charger, intended for this type of equipment. If in
doubt contact the seller or manufacturer service. Use only chargers and wires
recommended by the manufacturer. Using incompatible chargers or cables can
cause explosion of the battery or damage to your device. When the battery is
near a complete discharge, the notification is displayed on a low battery charge.
To continue use of the device charge the battery.
SIM cards
SIM cards
SIM cards
SIM cards
slot
slot
slot
slot
microSD
microSD
microSD
microSD
card slot
card slot
card slot
card slot
