mPTech 201807, Быстрый старт

Страница: 24 / 61

© 2018 mPTech. All rights reserved. Rumba - EN
24
Sounds and user profiles
To change sound profile select: [Menu] > [Settings] > [Profiles].
Select a sound profile and enter
[Options] > [Activate] > [Select] or
<OK> to activate the chosen profile or [Options] > [Customize] >
[Select], to edit the profile according to your own preferences. The
<#> key is used to quickly switch profiles in the standby mode.
Press it and hold for about 2 seconds. Pressing and holding key
again activates the next profile.
Calling
Enter the number using the keypad on the home screen. We
recommend that you enter the area code prior to the telephone
number. Press <Green handset > to start the call. Press <Red
handset> to finish the call.
Answering
You can receive an incoming call by opening the flip. If it is already
open - press <Green handset> button or <Options> > <Answer>.
When the flap is closed, the call is rejected by pressing the volume
control key (down - decrease volume). When the flap is open, the
call is rejected by pressing the <Red handset> key. This button also
finishes the call.
Messages
Creating and sending text messages
Enter : [Menu] > [Messages] > [Write message]. Type in the
message using the keypad. Signs are typed in letter by letter. <#>
button is used to change the input method. The following are
possible: You can choose from Abc - the first letter will be capital,
the rest lower case, abc - only lowercase, ABC - only uppercase, 123
- digits only. To enter a special character i.e. period, comma, dash,
etc., press <*> and choose from the list, or press the <1> a number
of times (in a mode other than "Numeric"). Space between words
is made by pressing <0> zero button.
To send the message, select
[Options], then [Send to] and [Input number] or select a number
from the contacts list and confirm with <OK> and enter [Options] >
[Send].
Messages display
Enter: [Menu] > [Messages] > [Inbox], choose a message from the
list and press [Options] > [View].