mPTech 201807, Быстрый старт

Страница: 23 / 61

© 2018 mPTech. All rights reserved. Rumba - EN
23
Charging the battery
Plug the USB cable into a suitable charger socket and the microUSB
plug into the microUSB cable socket on your phone and plug the
charger into a power outlet. You can also connect the microUSB
plug of the microUSB cable to the microUSB socket in the charging
base and place your phone in it so that the connectors (24) in the
phone come into contact with the connectors in the base.
*Caution: Incorrect connection of the charger may cause serious
damage to your phone that is not covered by the warranty.
While charging, a static icon of battery state located in upper right
corner of the screen will become animated.
When charging is complete unplug the charger from the power
outlet. Unplug the cable from the socket on the phone.
Emergency choice of language
If somebody accidentally sets the language you do not understand,
go to your Home Desktop and press the [Menu] > [Down] > [Down]
> [Down] > (OK) > [Down] > (OK) > [Down] > (OK) buttons, and select
the language you want to use.
Connecting your phone to the computer
The phone can be plugged to the PC computer using USB cable.
This allows you to view and exchange data between your computer
and your phone when a microSD card is installed. To do that
connect the microUSB connector to USB port in your phone then
connect the USB connector to a USB port on your computer. An
information about USB connection will be displayed on your phone
screen. Choose [Mass storage] from the displayed list. The phone
is now connected to the computer. The contents of the phone
memory can be viewed using Windows Explorer.
First start-up
When you start the phone for the first time, select the language in
which the menu will be displayed. Then you can enter the current
time and date. To confirm the changes, select <Save>.