© mPTech 2018. All rights reserved. Halo S+ – EN
24
Charging with the cradle charger
Connect the microUSB charger to the connector in the cradle
charger, then connect the charger plug into the power grid. Place
the phone in the charging base.
*Attention: Improper connection of the charger can cause serious
damage to the phone. Damages caused by an improper use of the
phone are not covered by the warranty.
Sounds and user profiles
To change sound profile select: [Menu] > [Settings] > [Profiles].
Select the desired profile and press [Options] > [Activate] to
activate the selected profile, or press the [Options] > [Customize]
button to edit the profile according to your preferences. To save
the changes press [Options] > [Save].
SOS button
myPhone Halo S+ phone has got an SOS button It is placed at the
back of the phone. SOS button option can be turned on by
entering [Menu] > [Settings] > [SOS settings]. We recommend
that one of the family numbers should be the emergency number,
and that you include your address and any serious and chronic
conditions (diabetes, epilepsy, coronary heart disease, etc.) in the
body of your message.
Lock the phone
To lock the keypad, close the phone and the screen will turn off
automatically or press [Menu] > Green handset. To unlock the
keypad slide the phone or press [Unlock] > Green handset.
Calling
Enter the number to the main screen using the numeric keypad.
We recommend that you enter the area code prior to the
telephone number. When the phone is closed, unlock the phone
without sliding it and select a contact from the phonebook -
[Contacts]. Press <Green handset> to start the call. Press <Red
handset>, to finish the call.
