Innovative Racing Electronics
Phone: 321.972.8282 – Fax: 321.972.5123
380 Orange Lane – Casselberry, Florida 32707
MPS ADJUSTABLE PRESSURE REGULATOR
MADE IN USA
The pin valves on CO2 bottles operate like schrader valves on a tire. Pushing down the pin
opens the valve. The pin valve actuator works by pushing down on the pin when you screw the
on-off knob clockwise. Since CO2 is a liquid in the bottle and the regulator can’t regulate liquid,
you must mount the bottle so that only gas and no liquid can get into the regulator. The regulator
has a female 1/8” NPT outlet port and four (4) 1/8” NPT ports that comes plugged. We fit a fitting
that will accept ¼ poly line into the outlet. Our Adjustable Pressure Regulator allows pressure
adjustment of CO2 and/or Nitrogen high pressure bottles from 0 – 160 PSI. -The regulator is set
with a 3/16” allen wrench. We recommend having a small tank between the regulator and the air
valve.
To install and set up the MPS Paintball Regulator assembly follow the directions below.
Construction:
Aluminum sand blasted black anodize.
Inlet Pressure:
Max 1000 PSI
Adjustment Range:
0 -160 PSI
Resettable Relief Valve:
140-150 PSI
Lubrication:
Any Silicone based, non-petroleum lubricant.
Adjustment:
3/16” Allen wrench
Tournament Cap:
Can be locked out with zip tie.
Piston:
Threaded with 1/2-20 female thread for ease of maintenance.
Maintenance kit included
