MPM MCZ-51, Руководство пользователя, Страница: 9 / 24

9
GB
USING THE KETTLE
1.
Before illing with water, remove the kettle from the base (7).
2.
Open the lid and ill the kettle with water up to the desired level (between 0,5 l and 1,7 l).
3.
After plugging the base to the power outlet, the display turns on for a moment, all buttons
are lit and the appliance beeps twice which means that the base is connected to the power
source and the kettle is placed on the base.
4.
Close the lid and place the kettle on the power base (7), the appliance beeps once, the display
turns on and the ON/OFF button stars to lash blue. Below the horizontal line on the display
you will see the current water temperature which will be visible for about 5 seconds. If you
do not perform any actions, the kettle turns of automatically.
5.
Press the ON/OFF button (11) without setting other functions. The kettle turns on and beeps,
the ON/OFF button will be lit red. The kettle boils water up to 100°C, then switches of auto-
matically and beeps three times.
6.
If you just want to heat up the water, use the boiling temperature buttons „+” or „–”. Press
once to change the temperature. The temperature setting will be shown on the display. You
may select between the pre-deined temperature settings: from 10°C up to 100°C each 10°C.
If the temperature set is lower than the temperature of water in the kettle, the kettle switches
of.
7.
After reaching the desired temperature of water, the kettle switches of and beeps three
times.
8.
If you want to select the keep-warm function, press the button (12) , the keep-warm sym-
bol will be shown on the display. In this mode press the button „+” or „–” to set the desired
temperature. The temperature adjustment (increase and decrease) step is 10°C. The available
range of temperature setting 40–100°C. In order to switch of the keep-warm function, press
the keep-warm button (12) again or ON/OFF button (4) to switch of the kettle. Otherwise the
water temperature will be maintained at a pre-set level. If no action is taken for 2 hours in the
keep-warm mode, the kettle will switch of. Press the ON/OFF button (4) again to turn on the
kettle (the kettle beeps once).
NOTE! The kettle may be used only with the based attached. Do not open the lid when boiling water.
OPTIMUM TEMPERATURE FOR TEA AND COFFEE
40‑60°C – blends for babies
70°C – green and white tea
90°C – instant cofee
100°C – black tea
CLEANING AND MAINTENANCE
NOTE! Regularly remove limescale deposits from the kettle according to the instructions below. Before
cleaning the kettle, unplug it and wait until it cools down.
1.
Fill the kettle with water and vinegar or juice (citric acid) or use a special descaling agent
available in household stores.
2.
Leave the kettle for 1 hour, then boil the water.
3.
Empty the kettle and rinse it thoroughly with cold water.
4.
If necessary repeat the procedure 1-3 times.