MPL PIP19, Техническое справочное руководство

Страница: 36 / 56

3.5.2.7 LVDS Connector (J27)
This connector allows a direct connection of a 18 bit LVDS flat panel.
Pin Signal Description Pin Assignment
1 LVDS1_TX0- Channel1 port 0 data line -
2 LVDS1_TX1- Channel1 port 1 data line -
3 LV Channel1 port 0 data line +
4 LV Channel1 port 1 data line +
5 LVDS1_TX2- Channel1 port 2 data line -
6 LVDS1_CLK- Channel1 clock line -
7 LV Channel1 port 2 data line +
8 LV Channel1 clock line +
9 Weak Pull Down 10k pull down to GND (since PCB rev. C)
10 +3.3V +3.3 V system voltage
11 Weak Pull Down 10k pull down to GND (since PCB rev. C)
12 +3.3V +3.3 V system voltage
13 VDDENA Flat panel VDD enable
14 +5V +5 V system voltage
15 DDCDAT DDC bus data
16 GND Ground
17 DDCCLK DDC bus clock
18 +5V +5 V system voltage
19 GND Ground
20 LVDS2_TX0- Channel2 port 0 data line -
21 GND Ground
22 LV Channel2 port 0 data line +
23 LVDS2_TX1- Channel2 port 1 data line -
24 LVDS2_TX2- Channel2 port 2 data line -
25 LV Channel2 port 1 data line +
26 LV Channel2 port 2 data line +
27 LVDS2_CLK- Channel2 clock line -
28 Weak Pull Down 10k pull down to GND (since PCB rev. C)
29 LV Channel2 clock line +
30 Weak Pull Down 10k pull down to GND (since PCB rev. C)
1 2
29 30
Figure 34: LVDS Panel Connector (Molex, 501190-
3017)
3.5.2.8 Touch Panel Connector (J21)
This connector allows the connection of a PS/2 or USB touch panel controller.
Pin Signal Description Pin Assignment
1 +5V 5 V PS/2 voltage
2 MSCLK PS/2 mouse clock
3 MSDAT PS/2 mouse data
4 GND Ground
5 +5V 5 V USB voltage
6 DATAp USB2.0 Port Balanced Data Line +
7 DATAn USB2.0 Port Balanced Data Line -
8 GND Ground
9 NC Not connected
10 NC Not connected
1
5
6
10
Figure 35: Touch Panel Connector (Samtec,
IPL1-105-02-S-D)

2012 by MPL AG 36 MEH-10126-201 Rev. F
High-Tech • Made in Switzerland
PIP19 / PIP20 / PIP22 / PIP23
Technical Reference Manual