2.2 MECHANICAL SPECIFICATION
2.2.1 HOUSING
•
Aluminum
•
No ventilation holes
•
Easily mountable on 35 mm DIN rail
2.2.2 FORM FACTOR
•
Length:
270 mm (10.63 inch) standard version
440 mm (17.32 inch) Wintergarden version with PCI slot extension
•
Width:
162 mm (6.38 inch)
•
Height:
62.0 mm (2.44 inch) standard version
82.5 mm (3.25 inch)
120 mm (4.72 inch)
2.2.3 WEIGHT
•
Typically 2.2 kg (4.85 lb.) (Standard housing, equipped with internal 2.5 inch HDD and CDROM)
2.3 ELECTRICAL SPECIFICATION
2.3.1 POWER SUPPLY
•
High-efficiency 6 channel switching regulator module
•
ATX behavior (Soft off)
•
Power input is ESD protected
2.3.2 FUSE
•
5 x 20 mm, 3.15 AT
•
Field changeable
2.3.3 RTC BATTERY
•
Renata CR2032 3V Lithium Coin Cell Battery (20.0 x 3.2 mm)
•
3 V / 230 mAh
•
Field changeable
2.3.4 INPUT POWER
•
8 V
DC
.. 28 V
DC
•
Optional 20 V
DC
.. 48 V
DC
•
The power usage can change in a wide range according to the selected PIP variant, the amount of installed
memory and also according to the needed CPU, memory, graphics and interfaces usage. As examples:
PIP
Variant
ATX Soft Off
without ETH Link
ATX Soft Off
with 2 ETH Links
BIOS Setup
Screen
*1
WinXP Desktop Screen
without CPU Load
*1
WinXP with SiSoft
Sandra Burn-In Tool
*1
PIP19
0.4 W
1 W
15 W
14 W
19 W
PIP20
0.4 W
1 W
19 W
15 W
28 W
PIP22
0.4 W
1 W
21 W
16 W
30 W
PIP23
0.4 W
1 W
27 W
16 W
54 W
*1
: For Measuring PIPs were equipped with 2 GByte SDRAM (1 GByte on board and 1 GByte on SODIMM
module), 2.5” hard disk, one GbE Link, DVI or CRT Monitor and V
IN
= 12 V.
2012 by MPL AG
15
MEH-10126-201 Rev. F
High-Tech • Made in Switzerland
PIP19 / PIP20 / PIP22 / PIP23
Technical Reference Manual
