QUICK START MANUAL
PIRS
- 13 -
4. Calibration
4.1. General
The calibration procedure is essential before making the measurements. To carry out the
generation of the chosen field target it is first necessary for PIRS to associate all the
frequencies with the necessary dBm of power that it must be supply according to the
chosen setting.
For this compilation process it is essential to use a meter that reads the filed level of a
sample probe
4.2. Quiet zone pre-saved
The calibration lists are already saved in the instrument. The calibration is carried out by
MPB according to the customer’s requests. With these configurations the operator only
needs to reproduce the same calibration setup and perform the measurement as show in
cap 5
4.3. Quiet zone with sample probe
The PIRS must be configured according to the setting show below.
Figure 10