OnCell G2111/G2151I Series
GSM/CSD Connection
4-3
5.
Type
ATH
and press
Enter
to disconnect.
ATTENTION
+++ is the escape sequence, and ATH is the hang-up command.
For international calls, the local international prefix does not required, but the + character is. You would type
ATD+886289191230.
Answering a CSD Connection
PComm Terminal Emulator can be used to answer a CSD call manually:
1.
When the terminal displays “RING”, type
ATA
and press
Enter
.
2.
Check the STATUS indicator on the front panel. If the LED is steadily on, the CSD connection has been
established successfully. The modem will automatically switch to data mode. At this point, you can proceed
with data communication.
3.
PComm Terminal Emulator can be used to configure the modem to answer CSD calls automatically:
4.
In the terminal window, type
ATS0=x
and press
Enter
. For
x
, substitute the number of rings that the
modem should receive before answering the call. For example, to answer after the first ring, type
ATS0=1
.
5.
Type
AT&W
and press
Enter
.
www.ipc2u.ru
www.moxa.pro
