OnCell G2111/G2151I Series
Getting Started
2-4
DIN-Rail Mounting
Built-in mounting appendages allow the modem to be mounted to a flat wall or on a DIN rail. Follow the
instructions below to mount the modem on a DIN rail.
ATTENTION
Before mounting the OnCell G2111/G2151I Series modem, we strongly recommend that you first remove the
antenna connection.
STEP 1:
Use a flat-blade screw driver to pull the
bottom mounting appendage out. It should snap
into place.
STEP 2:
Hook the modem over the top edge of the
DIN rail as shown.
STEP 3:
Place the modem flush against the
DIN rail as shown.
STEP 4:
Slide the bottom mounting appendage back in.
It should snap into place over the bottom edge of the
DIN rail.
www.ipc2u.ru
www.moxa.pro
