NPort 5000 Series User Manual
54
System Log Settings
NOTE
The NPort 5100, NPort 5200, and NPort IA5000 Series don’t support this function.
System Log Settings allow NPort users to customize network events that are logged by the NPort 5000.
Events are grouped into four categories, known as event groups, and the user selects which groups to log
as Local Log (on NPort 5000). The actual system events that would be logged for each system group are
listed under the column “Summary”. For example, if
System
was enabled, then System Cold Start events
and System Warm Start events would be logged.
Local Log
Keep the log in the flash of NPort 5000 up to 512 items.
System
System Cold Start
NPort 5000 cold start.
System Warm Start
NPort 5000 warm start.
Network
DHCP/BOOTP/PPPoE Get
IP/Renew
IP of the NPort 5000 is refreshed.
NTP
Time synchronization successful.
NTP Connect Fail
The NPot 5000 failed to connect to the NTP Server.
Mail Fail
Failed to deliver the email.
IP Conflict
There is an IP conflict on the local network.
Network Link Down
LAN 1 Link is down.
Config
Login Fail
IP Changed
Static IP address was changed.
Password Changed
Administrator Password was changed.
Config Changed
The NPort 5000’s configuration was changed.
Firmware Upgrade
Firmware was upgraded.
SSL Certificate Import
SSL Certificate was impoted.
Config Import
Config was impoted.
Config Export
Config was expoted.
OpMode
Connect
Op Mode is in use
Disconnect
Op Mode switched from in use to disconnect.
Authentication Fail
The Authentication failed in terminal; reverse terminal; or dial in/out operation
modes
Restart
Serial port was restarted.