- 2 -
Overview
The MGate 5119 Series is an Ethernet gateway designed for the power
industry to integrate Modbus, DNP3, IEC 60870-5-101/104 devices to
an IEC 61850 MMS network.
Package Checklist
Before installing the MGate 5119, verify that the package contains the
following items:
•
1 MGate 5119 gateway
•
1 serial cable: CBL-RJ45F9-150
•
Quick installation guide (printed)
•
Warranty card
Please notify your sales representative if any of the above items is
missing or damaged.
Optional Accessories (can be purchased separately)
•
CBL-F9M9-150:
DB9-female-to-DB9-male serial cable, 150 cm
•
CBL-F9M9-20:
DB9-female-to-DB9-male serial cable, 20 cm
•
CBL-RJ45F9-150:
RJ45-to-DB9-female serial cable, 150 cm
•
CBL-RJ45SF9-150:
RJ45-to-DB9-female serial shielded cable, 150
cm
•
Mini DB9F-to-TB DB9:
Female-to-terminal-block connector
•
WK-36-02:
Wall-mounting kit, 2 plates with 6 screws
•
CBL-PJTB-10:
Non-locking barrel plug to bare-wire cable
Hardware Introduction
LED Indicators
LED
Color Description
Ready
Off
Power is off or a fault condition exists
Green Steady: Power is on, and the MGate is functioning
normally
Red
Steady: Power is on, and the MGate is booting up
Blinking slowly: Indicates an IP conflict, or the
DHCP or BOOTP server is not responding properly
Flashing quickly: the microSD card failed
MB/101/
104/DNP3
Off
No communication with a Modbus/101/104/DNP3
device
Green Normal Modbus/101/104/DNP3 communication in
progress
Red
When the MGate 5119 acts as a Modbus master:
1.
Received an exception code from the slave
device
2.
Received a framing error (parity error,
checksum error)
3.
Timeout (the master sent a request but no
response was received)
When the MGate 5119 acts as an IEC 60870-5-
101/104/ DNP3 master:
