ioThinx 4500 (45ML) Module Series
Preface
1-3
WARNING
Devices discussed in this document are sensitive to electrostatic discharge, which can cause internal damage
to and/or affect normal operation of the devices. Observe the following precautions when handling a device:
•
Before touching the device, touch a grounded object with your finger to discharge static electricity.
•
Wear an approved grounding wristband.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the device in appropriate static-safe packaging when not in use.
WARNING
Check the voltage supplied by the power source. Make sure the voltage provided by the power source matches
the voltage required by the device.
WARNING
Check the voltage or current of the sensors or loads. Make sure the voltage and/or current indicated on the
sensors or loads corresponds to the specifications of your 45ML module before you connect the device.
WARNING
Connect your device to an earthed ground.
CAUTION
Do not use the device if the device itself is already damaged. Replace defective or damaged devices to ensure
that your devices function properly.
CAUTION
Do not attempt to repair the device yourself. If your device needs to be repaired, return the device to Moxa’s
customer service department. Attempting to repair the device yourself could invalidate the device’s warranty.
Additional Resources
Refer to following documents for additional information.
•
Datasheets for the following products:
ioThinx 4530 Series
ioThinx 4500 Series (45ML) Modules
•
User’s Manuals:
ioThinx 4530 Series Hardware User’s Manual
ioThinx 4530 Series Linux User’s Manual
•
Programming Guide:
ioThinx 4530 Series Programming Guide