Moxa Technologies ioMirror E3200 Series Скачать руководство пользователя страница 1

 

 

P/N: 1802032100010 

*1802032100010* 

ioMirror E3200 Series 

Quick Installation Guide 

Ethernet Peer-to-Peer I/O 

Version 1.0, January 2019 

Technical Support Contact Information 

www.moxa.com/support 

Moxa Americas: 
Toll-free: 1-888-669-2872 
Tel:  1-714-528-6777 
Fax:  1-714-528-6778 

Moxa China (Shanghai office): 
Toll-free: 800-820-5036 
Tel:  +86-21-5258-9955 
Fax:  +86-21-5258-5505 

Moxa Europe: 
Tel:  +49-89-3 70 03 99-0 
Fax:  +49-89-3 70 03 99-99 

Moxa Asia-Pacific: 
Tel:  +886-2-8919-1230 
Fax:  +886-2-8919-1231 

Moxa India: 
Tel:  +91-80-4172-9088 
Fax:  +91-80-4132-1045 

 

 

 

 

 

 

 2019 Moxa Inc. All rights reserved. 

 

 

Содержание ioMirror E3200 Series

Страница 1: ...om support Moxa Americas Toll free 1 888 669 2872 Tel 1 714 528 6777 Fax 1 714 528 6778 Moxa China Shanghai office Toll free 800 820 5036 Tel 86 21 5258 9955 Fax 86 21 5258 5505 Moxa Europe Tel 49 89 3 70 03 99 0 Fax 49 89 3 70 03 99 99 Moxa Asia Pacific Tel 886 2 8919 1230 Fax 886 2 8919 1231 Moxa India Tel 91 80 4172 9088 Fax 91 80 4132 1045 2019 Moxa Inc All rights reserved ...

Страница 2: ...to 185 F LED Indicators Ethernet LEDs Ethernet Orange Live 10 Mbps Ethernet connection Green Live 100 Mbps Ethernet connection Blinking Transmitting or receiving data System LEDs PWR Red Power is on Off Power is off Ready Red System error Green ioMirror is functioning normally Off Power error condition exists I O LEDs DI 1 to 8 DO 1 to 8 Green Status is on Off Status is off Alarm Red DI has lost c...

Страница 3: ...lider back in Mounting on a wall Pull out both the top and bottom sliders and align the screws accordingly The heads of the screws should be less than 6 0 mm in diameter and the shafts should be less than 3 5 mm in diameter as shown in the figure Connecting to the ioMirror E3200 You have two ways to connect to the ioMirror E3200 by ioMirrorAdmin or by web console Default IP Address 192 168 127 254...

Страница 4: ...ults There are three ways to restore the ioLogik to factory default settings 1 Hold the RESET button for 5 seconds 2 Right click on the specific ioMirror in the ioMirrorAdmin utility and select Reset to Default 3 Select Load Factory Default from the web console NOTE Refer to the user s manual for detailed configuration and settings information ...

Отзывы: