ioLogik R2110 Series User’s Manual
Hardware Installation
2-4
LCD Display Module
As an
Easy View
device, the ioLogik R2110 supports an optional detachable LCD display module
for easier field maintenance. The display module is hot-pluggable and can be used to both display
and modify the server settings. When plugged in, the module displays the ioLogik R2110’s “home
page,” and pressing any button takes you into the settings and configuration.
LCD Display Module Controls:
Up:
go to the previous item
Down:
go to the next item
Left:
exit the current submenu and return to the previous menu (go up one level)
Right:
enter the selected submenu (go down one level)
Center: enter/exit editing mode
The up and down buttons navigate between the current options. The right and left buttons enter
and exit the submenus. On the ioLogik R2110, the center button is used only when restarting the
server.
Display Explanation
/
Actions
ioLogik R2110
ID:01 Bps:115200
This is the default “home page” showing the unit ID and
baudrate. Press the down button to begin navigating the setting
options.
<ioLogik R2110>
server
Enter this submenu to access the following items of
information:
y
serial number
y
name
y
location
y
ioLogik R2110 firmware version
y
display module firmwware version
y
model name
<ioLogik R2110>
serial port
Enter this submenu to display the RS-485 serial
communication port setting:
RS-485 Setting: 115200,n,8,1
<ioLogik R2110>
i/o SETTING
Enter this submenu to access DI/O channel status. DI channels
may be ON/OFF or CT (for event counter). DO channels
may be ON/OFF or Pulse. Here are examples of settings that
you might see:
y
DI-00 = ON
y
DI-07 [CT] = 0
y
DO-01 = [Pulse] = 1 Hz
y
DO-03 = ON, or OFF
Press
up
, or
down
to navigate through the different I/O
channels without having to go back to the previous menu.
<ioLogik R2110>
save/restart
Enter this submenu, then enter the
restart now
submenu to
display the
restart
option. You may press the center button at
that point in order to reboot the ioLogik R2110. For this
device, no other options are currently available for this set of
submenus.
