Moxa Technologies ioLogik 2512 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 102

Moxa Technologies ioLogik 2512 Скачать руководство пользователя страница 82

ioLogik 2500 Series

Cellular Network Setup and Configuration (for cellular models)

6-9

DDNS

The purpose of DDNS is to provide you with an alternative cost effective cellular plan. You will not need to
establish a server or pay for a Static IP. Setting up DDNS allows the ioLogik 2500-GPRS/HSPA to behave
like a server and perform functions such as email, ftp, etc. Regardless of whether the device has a floating
IP or a private IP, the user can establish a connection with their remote device through DDNS. DDNS allows
the SCADA/HMI server to establish a connection through the DDNS server to find the remote device.

Service Provider (default=DynDns.org)

Currently, DynDns.org is the only option available for Server address.

Host name
Enter the name you created on www.dyndns.com in this field. The ioLogik 2500-GPRS/HSPA will update the
DynDNS server with this host name.

Username
This is the user name used for updating DDNS Server authentication.

Password
This is the password used for updating DDNS Server authentication.

Cellular Data Access

The Cellular Data Access setting is used for connecting to Moxa cellular data access utilities.

For detailed information on how to set up the cellular data access server, see the next section, Moxa
Cellular Data Access Utility.

IP address
Enter the IP address of the cellular data access server.

Port
Enter the port number of the cellular data access server.

«
...
80
81
82
83
84
...
»

Содержание ioLogik 2512







































































































Отзывы:

Нет отзывов