IEF-G9010 Series User Manual
21
6.
In the [DHCP] section, choose the DHCP service type
a.
Disabled:
No DHCP service will be provided on this interface.
b.
DHCP Server:
This interface will provide DHCP service to the devices that connect to the interface.
Configure the following additional settings:
i.
Start IP Address:
Enter the starting IP address of the DHCP address pool.
ii.
End IP Address:
Enter the ending IP address of the DHCP address pool.
iii.
Gateway Address:
Enter the gateway IP address that will be assigned to DHCP clients.
iv.
Lease Time:
Specify the time (in seconds) that a client device can use the assigned IP address
provided by the DHCP server.
v.
(Optional)
DNS Server 1,2:
Enter the primary and secondary DNS server that will be assigned
to DHCP clients.
c.
DHCP Relay:
This interface will relay the traffic from the clients to a relayed server for DHCP
service. Configure the following additional settings:
i.
Relay Server Address:
Enter the IP address of the remote DHCP server.
Configuring the WAN Network Interface
Steps:
1.
Go to [Network] > [Network Interface].
The Network Interface tab will appear.
Содержание IEF-G9010 Series
Страница 78: ...IEF G9010 Series User Manual 78...
