background image

EM-1220 LX User’s Manual 

Introduction 

Overview 

The EM-1220-LX is a mini RISC-based communication platform that is ideal for embedded 
applications. The EM-1220-LX supports 2 RS-232/422/485 serial ports and dual 10/100 Mbps 
Ethernet LAN ports to provide users with a versatile communication platform. 

The EM-1220-LX uses the Moxa ART ARM9 RISC CPU. Unlike the X86 CPU, which uses a 
CISC design, the ARM9’s RISC design architecture and modern semiconductor technology 
provide the EM-1220-LX with a powerful computing engine and communication functions, but 
without generating too much heat. The built-in 8 MB NOR Flash ROM and 16 MB SDRAM give 
you plenty storage capacity and an additional SD socket provides you with flexible storage 
expansion for running applications. The dual LAN ports built into the ARM9 make the 
EM-1220-LX an ideal communication platform for simple data acquisition and protocol 
conversion applications, and the two RS-232/422/485 serial ports allow you to connect a variety of 
serial devices. 

The pre-installed µClinux operating system provides an open software operating system for 
software program development. Software written for desktop PCs is easily ported to the 
EM-1220-LX with a GNU cross compiler, so that you will not need to spend time modifying 
existing software code. The operating system, device drivers, and your own software can all be 
stored in the EM-1220-LX’s Flash memory. 

Ordering Information 

EM-1220-LX Embedded Module 

Product Description: 

The EM-1220-LX is a mini RISC-based ready-to-run embedded module 

that supports 2 serial ports, dual Ethernet, and SD; the 

μ

Clinux operating system comes 

pre-installed 

Package Checklist: 

y

 

1 EM-1220-LX embedded module 

EM-1220-LX Development Kit 

Product Description:

 The EM-1220-LX Development Kit includes a carrier board for testing and 

configuring the EM-1220-LX embedded module. The carrier board comes with a power adaptor, 
and has two built-in serial ports and two built-in Ethernet ports. 

Package Checklist: 

y

 

1 EM-1220-LX embedded module 

y

 

1 EM-1220-DK (carrier board for the EM-1220-LX) 

y

 

Quick Installation Guide 

y

 

Document & Software CD 

y

 

Cross-over Ethernet cable 

y

 

Console port cable: 
CBL-4PINDB9F-100: 4-pin header to DB9 (female) cable, 100 cm 

y

 

Universal Power Adaptor 

y

 

Product Warranty Statement 

NOTE: Please notify your sales representative if any of the above items are missing or damaged. 

 

1-2

Содержание EM-1220 LX

























































Отзывы: