EM-1220 LX User’s Manual
Getting Started
Configuring the Ethernet Interface
In this section, we use the serial console to explain how to modify the EM-1220-LX’s network
settings.
1.
Change directories by issuing the command
cd /etc
.
Type the command
vi rc
to use VI Editor to edit the configuration file. The IP addresses for
the EM-1220-LX’s LAN1 and LAN2 are:
ifconfig eth0 192.168.3.127
ifconfig eth1 192.168.4.127
as shown in the following figure. Edit these two lines to modify the static IP addresses.
2-4
