— 1 —
— 2 —
— 3 —
C320Turbo/PCI Intelligent
Serial Board
Quick Installation Guide
Fourth Edition, June 2008
1. Overview
C320Turbo/PCI provides an expandable and flexible COM/TTY solution
for 8- to128-port RS-232 applications. This serial board is ideal for
connecting a wide range of serial devices—including terminals, modems,
printers, scanners, cash registers, bar code readers, keypads, numeric
displays, electronic scales, and data acquisition equipment—to a PC.
C320Turbo/PCI is a MOXA Green Product. Moxa’s Green Products
satisfy the RoHS directive of the European Parliament, and accordingly,
do not contain cadmium and cadmium compounds, hexavalent chromium
compounds, lead and lead compounds, mercury and mercury compounds,
PBBs (polybrominated biphenyls), or PBDEs (polybrominated diphenyl
ethers).
2. Package Checklists
Moxa’s C320Turbo/PCI serial connectivity solution consists of the
Control Board
, a
Connection Cable
, and one or more
Modules
.
Components are packaged separately. Please notify your sales
representative if any items are missing or damaged:
Control Board (
required
)
C320T package contents:
y
C32010T/PCI Async Board
y
Software CD
y
C320Turbo/PCI Quick Installation Guide
Connection Cables (
must choose one
)
C32020T package contents:
y
Male DB25 to female DB25 cable (25 wires, 2 meter length)
C32050T Long-range Extension Kit package contents:
y
Male DB25 to female DB25 cable (10 wires, 2 meter length)
y
90-240 VAC switch power adaptor
Rackmount Connection Option
up to 100 m
Connection Cable
Control Board
Basic Module
Extension Module
Optional Power
Adaptor (C32050T)
Basic Modules (
must choose one
)
y
C32080T rackmount module (8 ports, RS-232, 10-pin RJ45)
y
C32081T rackmount module (16 ports, RS-232, 10-pin RJ45)
Extension Modules (
optional
—
up to 32 ports per control board
)
y
C32082T rackmount module (8 ports, RS-232, 10-pin RJ45)
y
C32083T rackmount module (16 ports, RS-232, 10-pin RJ45)
Desktop Connection Option
up to 100 m
Connection Cable
Control Board
CPU
Module
UART
Module
UART
Module
Optional Power
Adaptor (C32050T)
CPU Module (
required
)
y
C32030T CPU module
UART Modules (
choose at least one
—
up to 32 ports per control board
)
y
C32045T (8 ports, RS-232, female DB25)
y
C32047T (8 ports, RS-232, male DB25)
y
C32061T (8 ports, RS-422, female DB25)
y
C32065T (8 ports, RS-422, female DB25, w/ Isolation Protection)
y
C32071T (8 ports, RS-232, female DB25, w/ Surge Protection)
3. Hardware Installation Procedure
The C320Turbo/PCI board MUST be installed in the PC before installing
the driver. The following directions explain how to install the board in the
PC.
STEP 1
: Power off the PC.
STEP 2
:
Insert the C320Turbo/PCI control board firmly into any free
PCI or PCI-X slot.
STEP 3
:
Fasten the holding screw to fix the control board in place.
STEP 4
:
Use the cable to connect C320Turbo/PCI to the CPU module.
STEP 5
: Power on the PC.
STEP 6
:
Enter the PC’s BIOS to reserve a specific IRQ for
C320Turbo/PCI.
STEP 7
: Restart the PC.
4. Software Installation Information
The board MUST be plugged in before installing the driver. See the
previous section for instructions on how to install the board in your PC.
Refer to the C320Turbo User’s Manual for detailed instructions on
installing the drivers for this board.
Windows 2003/XP Driver Installation
1.
After powering on your PC, log into Win 2003/XP as Administrator.
2.
Insert the C320Turbo software CD in your CD-ROM drive.
3.
Select
Add/Remove Hardware
from Control Panel.
4.
Select
Add a device
.
5.
Select
Add new device
.
6.
Select
No, I want to select the hardware from a list
.
7.
Select
Multi-port serial adapters
.
8.
Select
Have Disk,
and then use the browse button to navigate to the
CD’s
C320\Software\Win2K-XP-2003
folder.
9.
Select the C320Turbo driver.
10.
Start the installation.
11.
Click
Yes
in response to any admonitions that the software doesn’t
contain a Microsoft digital signature.
12.
Click
Finish
to complete the driver installation
.
13.
If your ISA board configuration is not set as the default, you will need
to change the driver
settings to match the hardware configuration.
Use the
Device Manager
to check if I/O, IRQ, INT vector, etc. are
correct.
Windows 2000 Driver Installation
1.
After powering on your PC, log into Win 2000 as Administrator.
2.
Insert the C320Turbo software CD in your CD-ROM drive.
3.
Select
Add/Remove Hardware
from the Control Panel.
4.
Select
Add a device
.
5.
Select
Add new device
.
6.
Select
No, I want to select the hardware from a list
.
7.
Select
Multi-port serial adapters
.
8.
Select
Have Disk,
and then use the browse button to navigate to the
CD’s
C320\Software\Win2K-XP-2003
folder.
9.
Select C320Turbo driver.
10.
Start the installation.
11.
Click
Yes
in response to any admonitions that the software doesn’t
contain a Microsoft digital signature.
12.
Click
Finish
to complete the driver installation
.
13.
If your ISA board configuration is not set as the default, you will need
to change the driver
settings to match the hardware configuration.
Use the
Device Manager
to check if I/O, IRQ, INT vector, etc. are
correct.
Windows 95/98 Driver Installation
1.
After powering on your PC, log into 95/98 as Administrator.
2.
Insert the C320Turbo software CD in your CD-ROM drive.
3.
Run
Setup95.exe
for both Windows 95 and Windows 98. In both
cases, be sure to install the driver from the CD’s
C320\Software\Win9x\Windows.95
folder.
4.
After the board has been installed, the installation wizard will open
the port configuration window.
5.
Configure the I/O, IRQ, INT vector, etc.
6.
Restart the OS
Windows NT Driver Installation
1.
After powering on your PC, log into NT as Administrator.
2.
Copy the folder
C320\Software\WinNT\Windows.nt
to your hard
drive.
3.
Open the
Control Panel
, click on the
Network
icon, and select the
Adaptors
tab.
4.
Click the
Add
button, and then
Have Disk…
in the
Select Network
Adapter
window.
P/N: 1802003201500
