Moxa Technologies Airworks AWK-3131A-M12-RCC, Руководство пользователя

Страница: 26 / 94

AWK-3131A-M12-RCC Web Console Configuration
3-11
RF type
Setting Description Factory Default
2.4 GHz
B
Only supports the IEEE 802.11b standard B/G/N Mixed
G Only supports the IEEE 802.11g standard
B/G Mixed Supports IEEE 802.11b/g standards, but 802.11g may operate
at a slower speed if when 802.11b clients are on the network
G/N Mixed Supports IEEE 802.11g/n standards, but 802.11n may operate
at a slower speed if 802.11g clients are on the network
B/G/N Mixed Supports IEEE 802.11b/g/n standards, but 802.11g/n may
operate at a slower speed if 802.11b clients are on the network
N Only (2.4GHz) Only supports the 2.4 GHz IEEE 802.11n standard
5 GHz
A
Only supports the IEEE 802.11a standard
A/N Mixed Supports IEEE 802.11a/n standards, but 802.11n may operate
at a slower speed if 802.11a clients are on the network
N Only (5GHz) Only supports the 5 GHz IEEE 802.11n standard
Channel Width (for any 11N RF type only)
Setting Description Factory Default
20 MHz Select your channel width, If you are not sure which option to
use, select 20/ 40MHz (Auto) 20 MHz
20/40 MHz
Channel bonding
If 20/40 MHz only is the Channel Width setting, this channel bonding will auto set the channel based on your
channel setting.
Channel (for AP/Master/ACC mode only)
Setting Description Factory Default
Available channels vary
with RF type The AWK-3131A-M12-RCC plays the role of wireless AP,
Master, or ACC. 6 (in B/G/N Mixed
mode)
SSID
Setting Description Factory Default
Max. of 31 characters The SSID of a client and the SSID of the AP must be identical for
the client and AP to be able to communicate with each other.
MOXA
SSID broadcast (for AP/Master/ACC mode only)
Setting Description Factory Default
Enable/ Disable SSID can be broadcast or not Enable
Management frame encryption
Setting Description Factory Default
Enable/ Disable Enables management frame encryption to protect your wireless
network from DoS attacks. This function only works with
Moxa's Wireless device such as TAP, AWK-RCC, and RTG series
devices. Disable
NOTE Product models such as the AWK-3131A-M12-RCC-EU Series use EU bands that are under ETSI regulation.
Users must disable the SSID broadcast setting in these models when they use 5 GHz channels 36, 40, 44, 48,
52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140.
Client Isolation (for AP mode only)
Client isolation is used to isolate the associated wireless clients connected to one or more APs. Isolated clients
cannot communicate with each other, so the level of security is increased. Depending on the type of client