AIG-300 Series HW UM
Hardware Connection Description
3-5
Connecting the Digital Inputs and Digital
Outputs
There are four digital inputs and four digital outputs on the top panel. Refer
to the figure on the left for detailed pin definitions.
Inserting the SIM Card
The device comes with a SIM card socket that allows users to install two SIM cards for cellular
communication.
Step 1
Remove the screw on the SIM card holder cover
located on the bottom panel of the device.
Step 2
Insert the SIM card into the socket.
Make sure you insert in the right direction. To remove
the SIM card, press the SIM card in to release and then
you can pull out the SIM card.
Installing the Wi-Fi Module (US, EU, AP, and
CN models only)
The optional Wi-Fi wireless module is not included in the product package and should be purchased
separately. The Wi-Fi wireless module package contains the following items:
•
1 x Wi-Fi module
•
1 x thermal pad (25 x 10 x 1 mm)
•
2 x black screws (M2.5 x 4 mm)
•
2 x bronze spacers (M/F M3 x 4/M3 x 5 mm)
•
1 x insulation pad
•
1 x heatsink
NOTE
Notify your sales representative if any of the above items are missing or damaged.