10
Instruction manual - EN
11
Use and safety guidelines
INTENDED USE OF THE SYSTEM
For correctly operating the Move Solutions™ monitoring system, follow the exact
procedures and instructions given in the chapters “Intended use” and “Installation gui-
de” of each specific sensor.
The general installation steps for correctly operating the Move Solutions™ structural
monitoring system, to be carried out in their exact order, are:
1.
Correct orientation and installation of all sensor devices, see chapters “Intended
use” and “Installation guide” of each specific sensor.
2.
Installation of the Gateway receiving device in line of sight (i.e. no obstacles in
the signal trajectory) with all the other devices installed on the structure.
3.
Configuration of the operating parameters of each individual sensor and device
installed on the Move Cloud Platform™.
3
IMPORTANT
•
Each single device of the monitoring system must be installed and
oriented correctly, in such a way that communication and data exchan-
ge are optimized.
•
Failure to follow this installation guide could cause interference, radio
problems and/or alterations in the signal and recorded data.
Before proceeding with handling, installation and subsequent use of each device and
to ensure the correct operation of the system, make sure that:
•
The operating temperature range is between -40 ° C and + 85 ° C;
•
The storage temperature range is between -40 ° C and + 85 ° C;
•
99% is the maximum relative humidity conditions.
•
The use area and storage area of the devices cannot be hit by water, steam jets
and corrosive acids. The device must never be subjected to atmospheric agents
before being correctly installed.
NOTE
•
The manufacturer cannot be held responsible under any circumstances for ac-
cidents or damage resulting from improper use of the device, or as a result of
negligence on the part of a user.
•
Failure to comply with the rules of use and the methods of intervention, in-
stallation, configuration, use and maintenance of each single device that are
contained in this manual also results in the cancellation of the warranty terms.
UNINTENDED USE OF THE SYSTEM
No use other than those described in this manual is allowed. No use other than tho-
se described in the chapter “Introduction to the Structural Monitoring System” and “Use
and safety guidelines” is allowed.
It is absolutely forbidden to make any changes to any of the devices of the monito-
ring system. Any damage to people, animals or things deriving from the use of the
device improperly modified by an unauthorized operator relieves the manufacturer
of any responsibility.
IMPORTANT
•
DO NOT modify the device (neither hardware nor firmware).
•
DO NOT use the device with incompatible accessories.
•
DO NOT use the device for applications other than those indicated in
this manual.
•
DO NOT let the electrical connections of the device come in contact
with sources of direct water or other liquids.
•
DO NOT place the product near chemicals or in places where chemi-
cals can spill onto the product. Any contact of the product with chemi-
cals may result in a risk of fire or electric shock. Such substances could
ruin and damage the antenna contact, resulting in the risk of product
malfunction, fire or electric shock.
•
DO NOT install the device near high voltage cables.
•
DO NOT attempt to repair the product yourself. Opening or removing
the cover will invalidate the warranty. For technical assistance, please
contact Customer Service directly at [email protected] .
3. Use and safety guidelines