70
71
Instruction manual - EN
IMPORTANT
•
Turn on the Gateway SHM device only when all 5 antennas are correct-
ly connected.
If the SHM Gateway fails to connect to the network and is still Offline, we recommend
repeating the procedure described above. If the problem exists, contact technical
assistance by contacting Customer Service directly at [email protected].
After successfully completing this network access procedure, the SHM Gateway ap-
pliance is ready to be installed on the reference structure.
TEMPORARY NETWORK DISSERVICE
The Gateway SHM device is able to store the data detected and transmitted by the
sensors even in the event of a network outage and forward them to the Move Cloud
Platform™ as soon as it is available again.
STATIC IP ADDRESS CONFIGURATION
If you want to transfer data via a LAN connection, instead of using a SIM Card, you
may need to configure a static IP address on the device, to do this you need to:
1.
Wait for the SHM Gateway to generate a WiFi network, connect to it with your
PC with the following login information:
• WiFiNAME: MG - xxxx [last four digits of the device code].
• WiFiPWD: see the label on the PoE adapter box.
2.
Access the internet with a search engine and type the following IP address in
the URL bar:
• 192.168.230.1
3.
Access the configuration interface with the following access data:
• User name: root
• RootPWD: see the label on the PoE adapter box.
4.
Click on “WAN Interface” under the “Network” section of the side menu.
5.
Select “Static Address” in the drop-down menu of the “Protocol” item, and click
on the “Change protocol” button.
6.
Complete the Static Address configuration procedure by filling in all the requi-
red fields and click on “Save & Apply”.
7.
Restart the SHM Gateway device, then disconnect and reconnect the power
supply to make the changes effective.