26
Instruction manual - EN
27
•
DO NOT subject the electrical connections of the device to sources of
direct water or other liquids.
•
DO NOT place the product near chemicals or in places where chemi-
cals can spill onto the product. Any contact of the product with chemi-
cals may result in a risk of fire or electric shock. Such substances could
ruin and damage the antenna contact, resulting in the risk of product
malfunction, fire or electric shock.
•
DO NOT install the device near high voltage cables.
IMPORTANT
•
DO NOT install the device near large metal structures that can cause
interference by interrupting or modifying the radio communication si-
gnal.
•
DO NOT place objects around the product. Such objects could interfe-
re with the radio communication signal.
•
DO NOT place the product in a heavily trafficked area. If you need to
place the product in a trafficked area, make sure it is positioned in a
protected place and safe from accidental drops that can cause serious
damage to people and the product.
•
DO NOT place heavy objects on the product.
•
DO NOT place the product near devices that contain or generate ma-
gnetic fields. They could interfere with the operation of the product,
causing problems with detections’ quality.
•
DO NOT place the product near radio wave sources. Interference with
the operation of the electronic components of the product may occur.
•
If the external structure of one of the components of the DECK device
presents sharp edges following an accidental damage, such that the
component may result dangerous or make its IP protection degree
may be affected, it is necessary to contact the authorized assistance
and carefully follow their instructions.
IMPORTANT
•
The product has been designed, manufactured and tested to meet all
specific standards if and only if installed, oriented and configured per-
fectly.
•
Failure to comply with the warnings indicated in this section could al-
ter the data detected by the sensors.
•
If the installation, configuration, use and/or maintenance of the devi-
ce are not carried out according to the manual, anomalies may occur
during its use, and safety problems may also occur. Inappropriate in-
stallation, configuration and maintenance will void the warranty.
5. DECK device