Use the steps below as a guide to quickly set up your camera so it will function
using the factory default settings.
STEP 1
Open camera cover. Press the
Battery Chamber Release
button. Install 6 C-Cell Alkaline
batteries. Recommended for
use: Duracell
®
or Energizer
®
batteries.
STEP 2
Insert SD Memory Card until you
hear an audible click.
Camera will
not operatewithout SD Card.
Turn
the power ON. Press the (Menu)
button to switch the camera
to (Setup) and set the time
and date.
STEP 3
Mount Camera in desired
Location using mounting straps.
Switch camera to IR Aim.
STEP 4
Aim camera using motion
detection to determine target
area. Turn the power ON. Close
cover. The camera will operate
using factory settings.
Quick Start Guide
Viewing Time Lapse Images
•
This easy-to-use software allows you to advance through the series of images
a number of different ways:
1. Manually - by moving the scroll bar to either view the image series or to go quickly to a
specific frame (frame 125, for example).
2. Click Begin/End - regardless of what pictures you are
viewing, clicking on these buttons will take you directly to
the beginning or to the end as you prefer.
3. Click Frame Advance - this will allow you to view each
image in turn, one image at a time.
4. Click Rewind/Pause/Play - this is the (Play) button; this
will allow you play the images in sequence as well as
to pause the play or rewind.
Note you can set speeds 1 to 8X by clicking the arrows.
5. Search - This function allow quick scanning of images
foreword and back. The scan pauses when the
software detects a change in pixel content from the
last photo viewed. We detect change based on
averages so it will not be as accurate as a manual
frame by frame search.
5.1
Sensitivity
A. Set to High, Medium or
Low - This sets the level of
pixel change the program will
detect. Note; a pixel change
will occur with a color, intensity,
lighting or movement so this
setting is critical to obtain the
desired
results.
3
16