Default Screen
Setup and Programming
When the cameras power is turned ON, (Auto) will
show on the top left corner of the LCD Display.
At this time, the picture count and the estimated
battery life will also be displayed. If no buttons are
pressed within 10 seconds the LCD screen will
enter sleep mode to conserve battery life. It will
then enter PIR detection (Game Detect) mode and activate when motion is detected. To
wake the camera manually, press and hold the menu button until you see the default screen
on the display.
Setup Selection Setting
After the camera is turned (ON) the LCD display
will indicate the default screen. Press the (Menu)
button and the (Setup Selection) screen will
appear. Press the (OK) button, the selection will
start to flash. Press the (up/down) buttons to
change the settings. Press the (OK) button again
to lock in selection. Press the (right) button to
move to the next setting. Using this method you
can customize your camera’s feature settings.
Setting Game Detect Features
When you choose (Game Detect) the LCD Display will automatically start showing the
different features within (Game Detect). Using the navigation process, set the features to
your desire.
Event Delay Setting
Press the (OK) button. Use the (Up/Down) buttons
to choose between (10 seconds, 30 sec.,
1 min., 5min., 10min., or 30 minutes). When your
selections has been made, press the (Right) button.
Setting Photo or Video
Press the (OK) button. Use the (Up/Down) buttons
to choose between Photo or Video. Press the (OK)
button. Press the (Right) button.
Setting Photo Quality
Press the (OK) button. Use the (Up/Down) buttons
to choose between 3 image quality settings.
1. High: 2560 x 1920
2. Med: 2048 x 1536
3. Low:
640 x 480
Press the (OK) button. Press the (Right) button.
Setting Multiple-Shots
Press the (OK) button. Use the (Up/Down) buttons
to choose between settings. Choose how many
pictures you would like to be taken in a sequence
when the camera is triggered (1, 2, or 3).Press the
(OK) button. Press the (Right) button.
Setting PIR Sensitivity
Press the (OK) button. Use the (Up/Down) buttons
to choose between 3 settings, (High, Medium, or
Low). Press the (OK) button. At this point the
(Game Detect) settings are complete. Press the
(Menu) button to return to the (Setup Selection)
screen. Press the (right) button to move to the
next setting.
Setting Additional Features
There are additional camera features that apply to the general operation of the camera. Use
the navigation procedure stated in the (Setup Selection Setting), to adjust the features.
Setting Date and Time
Press the (OK) button. Use the (Up/Down) buttons
to move from one value to the next. Press the (OK)
button to lock in selections. When all your selections
have been made, and the date and time has been
set, press the (Right) button.
Erase Images
Press the (OK) button. Use the (Up/Down) buttons
to choose between (Yes) - erase all images, or
(No) - does not change stored images. When your
selections has been made, press the (Right) button.
Setting Capture Mode
Press the (OK) button. Use the (Up/Down) buttons
to choose between operating modes. This camera
has 3 modes.
1. Game Detect - Capture photo or video
2. Time lapse - Capture photo based on the Time
Lapse program setting.
3. Hybrid - Uses a combination of Time Lapse
and Auto modes at different times of the day.
Press the (OK) button to lock in selection. Press
the (Right) button to move to the next setting.
Reset to Default settings
You can reset your camera to the factory default
settings. Press (Up/Down) to choose (YES) - all
setups restored to factory default or (NO) - keep
custom settings. Press the (OK) button again to
make selection. Press (Right) button to go to
the next menu.
10
9