Setting (IR) Infrared Flash
Press the (OK) button. Use the (Up/Down) buttons
to choose between
AUTO-(IR flash will fire depending on light intensity)
OFF-(IR flash is permanently off).
Press the (OK) button. Press the (Right) button.
Setting Camera Name
Press the (OK) button. Use the (Up/Down) buttons
to select an identity for your camera. For example
you can use a name or a location but, the identity
you wish to use is up to you. Press the (OK) button.
Press the (Right) button.
Upgrade Firmware
The firmware version is displayed. Press (Up/Down)
to choose setting.
(YES) -
To upgrade firmware.
(NO) -
Keep current firmware.
Make sure that a SD card with the new firmware is
inserted into the camera. Press the (OK) button to make selection. Make sure the process is
completed before pressing other buttons or powering the camera Off. Press (Right) button to
go back to (Setup Selection) screen.
Setting Time Lapse Features
When you choose (Time Lapse) the LCD Display will automatically start showing the
different features within (Time Lapse). Using the navigation process, set the features to your
desire.
Interval Time Setting
Press the (OK) button. Use the (Up/Down) buttons
to choose between 10, 30 seconds / 1, 5, 10, 15,
or 30 minutes / 1, 3, 6, or 24 hours. When your
selections has been made, press the (Right) button.
Setting Multi-Program
Press the (OK) button. Use the (Up/Down) buttons
to choose between 4 available settings:
1 PROGRAM, 2 PROGRAM, 3 PROGRAM or
4 PROGRAM. This indicates the number of cycles
the camera will operate within a 24 hours period.
Press the (OK) button. Press the (Right) button.
Setting Program Wakeup
Press the (OK) button. Use the (Up/Down) buttons
to choose between 24 different settings: any hour
from MIDNIGHT to 11 PM. This will determine what
time the camera will wake up during the program
and begin its time lapse program. Press the (OK)
button.
Setting Program Sleep
When wakeup time is set, the camera will
automatically move to the (Sleep) option. Set the
sleep time after the wakeup time you already set.
This will set the wake up and sleep during the
time lapse photography. Press the (OK) button.
Press the (Right) button.
Aiming Camera
After the camera has been mounted, open the
cover and slide the (Mode) Switch to (IR Aim).
Close Cover. Stand in front of the camera. The
(Status) LED will flash red when it detects
movement. Use this process to guide your
camera to cover the desired target area.
Using a Tripod
Set the Tripod facing up or down the trail
approximately 3 ft. high. Screw the camera
onto the Tripod head in a clockwise direction.
Lock the tripod into place.
Hint: Place something heavy around the legs
of the tripod to help hold the tripod in place.
Camouflage the tripod with local brush.
Note: Make sure that the brush does not
interfere with the camera.
Using a Tree Mount
The camera can also be mounted directly to a
tree using a mounting bracket that attaches
directly to a tree or pole. Strap the tree mount
to the tree and secure, then attach the camera
to the tree mount using the tree mount socket
located on the back of the camera.
Using Power Panel
Place near the tree where the camera is
mounted. Place for best exposure to sun. To
attach to a tripod secure the power panel to
the tripod angled upward for best exposure.
Plug the power panel to the 12V Power Panel
Plug. This will extend the life of your camera
in the field.
Note: Leave batteries in the camera installed
during use.
Moultrie Accessories
11
8