5
Moultrie Accessories
Product Overview
1 Security Lock Hole
2 Cover Latch
3 Mounting Strap Slot
4 Front Cover
5 On / Off Button
6 LCD Display
7 Infrared Sensor
8 Lens
9 LED Infrared Flash
10 Red Status Indicator
11 Green Battery Indicator
12 Up / Down Buttons
13 Select / Enter Buttons
14 Battery Chamber
15 Resolution Switch
16 Delay Switch
17 Mode Switch
18 Tree Mount Socket
19 SD Card Slot
3
4
5 6 7 8 9 10 11
19
20
2
1
13
12
14
18
17
15
16
21 22
23
24
20 USB Out Port
21 Cord Strain Relief
22 12V DC Power Panel Plug
23 Tripod Mount Socket
24 Water-resistant Seal
5
8
Aiming Camera
After the camera has been mounted, open the
cover and slide the (Mode) Switch to (IR Aim).
Close Cover. Stand in front of the camera.
The (Status) LED will flash red when it
detects movement. Use this process to guide
your camera to cover the desired target area.
Using a Tripod
Set the Tripod facing up or down the trail
approximately 3 ft. high. Screw the camera
onto the Tripod head in a clockwise direction.
Lock the tripod into place.
Hint:
Place something heavy around the legs
of the tripod to help hold the tripod in place.
Camouflage the tripod with local brush.
Note: Make sure that the brush does not
interfere with the camera.
Using a Tree Mount
The camera can also be mounted directly to
a tree using a mounting bracket that attaches
directly to a tree or pole. Strap the tree mount
to the tree and secure, then attach the
camera to the tree mount using the tree
mount socket located on the back of
the camera.
Using Power Panel
Place near the tree where the camera is
mounted. Place for best exposure to sun. To
attach to a tripod secure the power panel to
the tripod angled upward for best exposure.
Plug the power panel to the 12V Power Panel
Plug. This will extend the life of your camera
in the field.
Note:
Leave batteries in the camera installed
during use.
Содержание LX-30IR
Страница 1: ...MFH DGS LX30IR...