Moulinex INFINY PRESS REVOLUTION ZU500, Руководство пользователя

Страница: 12 / 45

Make sure to clean the inside of the screw (C) carefully; if necessary, use the brush (P) .
Clean the residue exit (K) with a lightly moist and non-abrasive sponge.
The pusher (A) , the feed tube (B) , the bowl (G) , the screw (C) , the juice collector (H) with
the spout with drip-stop (I) , the jugs (N) , and the foam separator (O) can all go into the
dishwasher. If the filters (D/E) are clogged, prewash them with warm water and washing up
liquid and use the brush (P) . If the filter residue exit is clogged, remove the residues using the
other end of the brush (P) .
Do not clean the juice collector (H) , the spout with drip-stop (I) , the plastic parts (bowl (G) ,
food presser (A) , feed tube (B) ) with the abrasive side of the sponge.
Tips: To extract the screw (C) from the filter (D/E) , turn both pieces together and then press
on the screw.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS SOLUTIONS
The appliance does not turn
on - Make sure that all parts are correctly assembled.
- Make sure that your appliance is properly plugged in.
- Check that the feed tube
(B) is correctly locked in
position.
The appliance stops suddenly
while functioning: the red
light flashes - Press the Start/Stop button (M) to switch off the
appliance.
- Start your appliance again. If the safety mechanism
shuts the appliance off again, take it apart, clean it and
turn it on again.
- Make sure that the screw (C) is not blocked.
The appliance turns off: the
white light flashes - This is a safety mechanism. We recommend that you let
the appliance cool down for a few minutes, clean it, and
then restart it by pressing the Start/Stop button
(M) .
Poor Juice Extraction - Clean the appliance: wash, rinse out and dry: the feed
tube (B) , the pressing screw (C) , the filter (D or E) ,
the residue strap (F) , the bowl (G) , the jugs, the spout
(H and I) and the dry residue colector (Q) .
- Make sure that the strap (F) is correctly positioned on
the filter (to collect residues) and that it is in good
condition.
Problems related to leaking - Check that all parts are correctly assembled, especially
the spout with drip-stop (I) .
6