MOULDPRO TCU-200, Руководство пользователя

Страница: 36 / 42

[36]
User Guidelines
– TCU-200
12-06-2019 Vers. 003
CAUTION
Waste oil has to be disposed as prescribed by law. Never let waste oil come into the
sewage system or soil.
14 Out-of-service / transport
Cool the temperature control unit down, mould drainage, turn it off, press the main switch and disconnect the
power supply. Disconnect all hoses from the temperature control unit.
The temperature control unit is to be emptied before shipping. The danger of freezing (bursting of pipes or
other components) at low temperatures can be reduced. The unit must be transported and/or stored in the
operating position.
CAUTION
Drain the unit to avoid freezing damages!
Avoid compressed air, blowing out with compressed air can damage the unit!
Never transport the unit lying
– Lying transport will destroy the unit!
15 Disposal
The temperature control unit must be drained completely and disposed of in accordance with local
regulations.
The temperature control unit can also be returned to MOULDPRO for disposal.
16
Water quality
Depending on the unit to be cooled or heat-balanced, certain requirements have to be met by the cooling water regarding
its quality. In order to protect all parts of the unit against corrosion, Mouldpro recommends as a matter of principle to treat
the water with a suitable cleaning agent (anticorrosive as well as non-ferrous metal protector and hardness stabilizer). In
addition, depending on the materials installed, the temperatures and the type of process, the following water quality data
have to be met.
As a rule the following data apply: