MOULDPRO TCU-200, Руководство пользователя

Страница: 22 / 42

[22]
User Guidelines
– TCU-200
12-06-2019 Vers. 003
Connection between Remote
set point signal 4...20mA o
0..10Vdc
is broken . Holds last
Set point value
Possible water leaking problem in the
process.
Disable heating and pump. Restarts
TCU unit.
No connection between PCB
card and RS485 o 0..20mA.
Holds last Setpoint value
Low water level for more than 10
seconds continuously in the TCU unit
tank. Disable heating and pump.
Restarts TCU unit.
9 Standard PCB settings.
Depending on TCU model and activated options, pressing the key will be shown on the display in B area.
Leak monitoring
Pressure pump outlet
Return pressure process
Process flow in return
Return temperature
Return process thermocouple broken
Other messages can be seen in A-B area pressing if TCU unit has activated configurable relays
(R2 or R3).