Mx350_01a_oi_e.docx / Nov-19
page 57 / 72
Linearization Menu
The linearization function is defined in this menu. This menu will only be showed, if the
LINEARIZATION MODE in GENERAL MENU is selected.
Linearization description and examples are shown in the appendix.
SOURCE
(Reference source for single-line display and large display)
0 SPEED A
Result of frequency measurement on channel A (or A / B 90)
1 COUNTER A
Result of the counter on channel A (or A / B 90)
2 SECOND COUNTER A
Result of the second counter (total counter / batch counter) on channel A
(or A / B 90)
(Only visible if "Second Mode -A" has been activated.)
3 SPEED B
Result of frequency measurement on channel B
(Only visible if corresponding "Operational Mode" has been activated.)
4 COUNTER B
Result of the counter on channel B
(Only visible if corresponding "Operational Mode" has been activated.)
5 SECOND COUNTER B
Result of the second counter (total counter / batch counter) on channel B
(or A / B 90)
(Only visible if "Second Mode -B" has been activated.)
6 FREQUENCY COLL.
Result of the linked frequency of channel A and B (A+B, A-B, B/A, ...)
(Only visible if corresponding "Operational Mode" has been activated.)
7 COUNTER COLL.
Result of the linked counter of channel A and B (A+B, A-B, B/A, ...)
(Only visible if corresponding "Operational Mode" has been activated.)
8 SCALED RESULT
Result of the additionally scaled process value
P1(X) - P24(X)
X-coordinate of the linearization point.
This value representing the display value which the unit show in the display without linearization.
-99999999
Smallest X-coordinate
0
Default value
+99999999
Largest X-coordinate
P1(Y) - P24(Y)
Y-coordinate of the linearization point
This is the display value, which the unit should show in the display with linearization.
E.g. P2(X) is replaced by P2(Y).
-99999999
Smallest Y-coordinate
0
Default value
+99999999
Largest Y-coordinate
