MotoSAT Nomad 2, Руководство пользователя

Страница: 17 / 29

BUTTONS
POWER: Provides power to the NOMAD Controller.
FIND: Pressing the FIND button causes the Mount to automatically begin
searching for your system’s primary satellite. This search continues until
the Mount has locked onto the satellite and peaked for highest signal
strength.
Pressing the FIND button after you have locked onto a satellite will control
one of two functions, depending on your system type:
- Non-Skewable, Single-LNB Mount: Pressing the FIND button while on
satellite enables you to toggle between multiple satellites. Pressing the
FIND button while locked onto a satellite will direct the system to go to the
next satellite in order such as:
• DIRECTV
©
can toggle between 1010 and 1190.
• Dish Network
©
can toggle between satellites 1100, 1190 and 1290.
•
Dish Network
©
International East can toggle between satellites
61.50, 1100, and 1190.
•
Dish Network © International West can toggle between satellites
1100, 1190 and 1480.
• Bell ExpressVu
©
can toggle between satellites 820 and 910.
- Skewable, Multi-LNB Mount: Pressing the FIND Button will locate all
satellites available with your LNB configuration simultaneously, and re-
peak the dish for higher signal quality. For Programming Options and their
assigned satellites, see “NOMAD Programming Options” on page 11.
STOW: Pressing this button returns the dish to its stowed or travel
position.
NOMAD FRONT PANEL
Your NOMAD features simple, push-button control of the Mount, along with
LED visual indicators that allow you to to see the Mount’s status at a glance.
Here is a brief overview of the NOMAD Front Panel.
POWER BUTTON FIND BUTTON STOW BUTTON
16