3
INDEX
Front Panel description
4
Rear Panel description
5
OPERATION
6
Power Up
Test Dish
Find Satellite
Memory Card
7
Firmware Upgrade
7
Network Configuration
8
Log Files
8
Error Messages
8
Error Codes defined
9
Programming Network Configurations
10
Performing a TEST DISH
10
MotoSAT Technical Support Information
11
COMPONENT AND FUNCTIONAL DEFINITIONS
Mount
– FREEDOM Dome and dish mechanics
FREEDOM SD2
– aka. Positioner, Controller or Control Box
SD Card
– The memory card used to load programming code and configuration
LNB
– The device under the dome that receives the satellite signal
Control Cable
– The 9 conductor cable that connects the Mount to the FREEDOM SD2
SD Card
– The data storage device which provides software and configuration updates
Azimuth Motor
– The motor on the mount that controls azimuth movement
Elevation Motor
– The motor on the mount that controls elevation movement
Scotch Locks
– The devices used to splice electrical wires on the mount
LED
– The lights on the front panel of the FREEDOM SD2 that indicate system status
Software
– Code which instructs the mount to locate and identify satellites
Configuration File
– The code that tells the mount which satellites to identify
Log Files
- Diagnostic files for monitoring the system as it goes through its various routines
800-247-7486
– The number that you may call if you have any questions concerning your
FREEDOM or its operation
