Operation
54
5.9 Advanced Menu
Menu
Description
Min
Max
Default Unit Reg. Type
PNU 62144
Advanced
↓
↓
Save Parameters
Saves all Read /Write
parameters to non volatile
memory
Yes : Parameters are
permanently written
No : Parameters remain
changed until next power cycle
No
Yes
No
Read/Write
PNU 19840
Advanced
Automatic Settings
↓
Automatic Pedestal
Automatically controls the
starting torque.
On: The initial torque is
increased until the motor starts
to rotate at a moderate speed.
Off: The initial torque is defined
by the "Start Pedestal".
Off
On
Off
Read/Write
PNU 20352
Advanced
Automatic Settings
↓
Automatic Ramp
Automatically controls the
torque applied to the motor
during the soft start.
On: The torque is adjusted to
suit the load.
Off: The ramp time depends on
the "Start Time" and "Current
Limit".
Off
On
Off
Read/Write
PNU 19968
Advanced
Automatic Settings
↓
Automatic End Start (1)
Automatically controls the time
taken for the motor to start.
On : The ramp time is
shortened if the motor is at
speed before the end of the
"Start Time"
Off: The ramp time depends on
the "Start Time" and "Current
Limit"
Off
On
Off
Read/Write
PNU 20160
Advanced
Automatic Settings
↓
Automatic Stop
Automatically controls the soft
stop to suit the application.
This feature is particularly
useful with pumping
applications.
On: If the motor is lightly loaded
it decelerates rapidly to the
point where the soft stop
becomes useful.
Off: The deceleration to the
point where the soft stop
becomes useful, will be slower.
Off
On
Off
Read/Write
